Its tested on iPhone 4 with 7.0.0 - 7.0.4 - 7.1.1 - 7.1.2 iOS versions.
ONLY iPhone 4 (IPHONE3,1) revision is supported !!! mabe later will support 4,2.
Download this file Zippyshare.com and extract it to c:/A folder. Use winrar to extract. WinRAR archiver
Download iphone firmware to the same folder. http://appldnld.apple.com/iPhone4/04...5_Restore.ipsw
1. Lets Go in to DFU mode.
How To Put Your iPhone Into DFU Mode
4. Launch "Gecko_iPhone_Toolkit.exe , Chose iPhone 4 (GSM) and press BOOT, than OK, than choose firmware we just downloaded (strictly it should be in the same directory as every other file)
NOTHING SHOULD HAPPEN!
5. Leave gecko running. Launch RUN.bat and wait until redsn0w finish its job. It will tell you that it is DONE !
Nowstart looking at your iphone screen.
6. Once iPhone screen starts to show a BIG white OK, Quit Redsnow, and go back to GECKO.
Press LAUNCH button and wait.
It should take 1 to 40 min untill software Bruteforces your PassCode.
iGnore if Gecko tool is frozes for a momment, just leave everything and depending on what PassCode it is, it will take some time.
For example 0011 code takes about 5 to 10 seconds to break, 5555 PassCode needs about 30 minutes, so 9999 can take more than one hour i think.
Whenyour PassCode is Found, it will prompt some text with your PassCode in Gecko tool as usually, just be patient.
If your iPhone Is Disabled,
jsut ssh to your iphone via https://sites.google.com/site/msftgu..._rd_rev04b.jar
it only works with older yava version 6,5 i think.. so you need to delete your java 7,x and install older one,, you can find it OldVersion.com i think.
once you done, you can turn on WinsCP Download WinSCP and login in to iphone.
just enter localhost as host,, port number will be 2022
username will be root
password alpine
than press black square (terminal simbol) and write mount.sh and press enter, wait a few moments and close this little window,.
Go to File location:
mnt1/System/Library/Preferences/com.apple.springboard.plist just edit this file with plist editor Download plist Editor
just change plist file entry about 'Failed Attempts' from what you have (it will be about 8 or 10 if its Disabled...) so just change it to something bellow 5, make it 1 or even zero. and save. than restart iphone, you will be at recovery mode, kick out from recovery mode with tinyumbrella and you will boot normally.
0 Response to "READ PassCode on iPhone 4 iOS 7.1.2"
Post a Comment