How to Root Galaxy S6 or S6 Edge with TWRP Recovery

This is the preferred method since it will root and install TWRP recovery simultaneously on your Galaxy S6 or S6 Edge and will work on ALL Galaxy S6 and S6 Edge models except AT&T SM-G920A, SM-G925A and Verizon SM-G920V, SM-G925V since they have locked bootloaders (unless you got the developer’s edition).
This root method works on the following models:
  • SM-G920F, SM-G925F (international)
  • SM-G920I, SM-G925I (international)
  • SM-G9200
  • SM-G9208
  • SM-G9209
  • SM-G920K, SM-G925K (KT Olleh Korean)
  • SM-G920L, SM-G925L (LG U+ Korean)
  • SM-G920S, SM-G925S (SK Telecom Korean)
  • SM-G920P, SM-G925P (Sprint)
  • SM-G920T, SM-G925T (U.S. T-Mobile)
  • SM-G920R4 SM-G925R4 (US Cellular)
  • SM-G920T1, SM-G925T1
  • SM-G920W8, SM-G920W8 (Canadian)

Step 1. Power off your Galaxy S6 or S6 Edge then hold down Volume Down, Center Home, and Power buttons together until you see a warning screen like shown below:
Step 2. Hit Volume Up button then connect a micro-USB cable from your S6/S6 Edge to your computer.
Step 3. Go to our CWM/TWRP page and downloading TAR version of TWRP for your model of Galaxy S6 or S6 Edge.
Step 4. Download and unzip.
Step 5. You should have downloaded the TWRP file ending in “.tar” like shown below:
Step 6. Run the ODIN program by double-clicking on it.  For Mac or Linux, you can  use JODIN instead.
Step 7. You should see a box in blue with a random COM number.  If you do not see this, you don’t have S6/S6 Edge Windows drivers installed, download S6/S6 Edge Windows drivers, run the driver program and you should see it.
Step 8. Choose “AP” then select the TWRP TAR file you downloaded earlier.
Step 9. Hit “Start” then IMMEDIATELY hold down the Volume Up, Center Home, and Power buttons together.
Step 10. If you did it right, you should be in TWRP recovery as shown below:
Step 11. Choose Reboot->System and if it asks you to disable overwriting of recovery (or something along those lines), say YES.  That will disable your OS from overwriting the TWRP recovery you just installed.
Step 12. Download SuperSU zip file and copy it to your S6/S6 Edge storage.
Download SuperSU zip file
Step 13. Power off your phone again then hold down Volume Up, Center Home, and Power button together.
Step 14. Let go of the Power button when the Samsung logo shows up but keep holding down the Volume Up and Center Home buttons until you see TWRP recovery.
Step 15. Once in TWRP recovery, choose “install”.
Step 16. Browse and select the SuperSU zip file and swipe to install.
Step 17. Once installed, simply reboot system and your S6 or S6 Edge should have full root!
Step 18. In app drawer, you will find SuperSU app, run it.
Step 19. If the SuperSU app asks you to update binaries, hit “Continue” to continue.
Step 20. Choose “Normal”.
Step 21. After about 30 seconds, you should see “Installation success”.  If you do not see this, try rebooting and try it again, it will work on the second try.
Step 22. Once done rooting, verify you have full root by installing and running any root app like Titanium backup app.  If you see Superuser request window pop up like below, congratulations!  You have successfully rooted you Galaxy S6 or S6 Edge!
Q: I am in a bootloop with my S6/S6 Edge, help!
A: There seems to be a bug in certain models with S6 and S6 Edge, if you end up in a bootloop, flash this CF Auto Root with ODIN (yes for both S6 & S6 Edge), then reinstall TWRP.


How To Root Galaxy S4 GT-I9505 On Android 4.4.2 KitKat

How to root Android 4.4.2 KitKat on Galaxy S4
Step 1: Download both the Chainfire Auto-Root package and Odin3 from the links above, and extract them to a convenient location on your PC.
Step 2: Put your Galaxy S4 into Download mode. This can be done by powering down the device and turning it back on by pressing and holding the volume down + power keys. Follow on-screen instructions to achieve Download mode.
Step 3: Fire up Odin on your PC and connect your phone (in Download mode) via USB cable. Let Odin configure things if it’s the first run – when device is properly connected, one of the COM boxes on top will turn yellow along with it containing a COM Port number.
Step 4: In Odin, click on PDA and select the CF Auto-Root file that you download in Step 1. Also check that Auto Reboot and F. Reset Time are ticked in Odin, whilst leaving all other settings as they are.
Step 5: Hit the Start button when ready. The process should take hardly a minute after which your device will automatically boot into recovery and set the SuperSU binaries in place.

That’s it – once the phone powers back on normally, you will have root access on your Galaxy S4 GT-I9505 running Android 4.4.2 KitKat. Enjoy!

[Guide] HTC ONE Hboot 1.57 Root S-Off Change CID Downgrade Hboot & OS

HTC ONE M7_UL Sense 6 OS 4.4.2 Hboot 1.57 S-Off & CID Change & Downgrade Hboot + Main Version

Strp - 1 Bootloader Unlocking

First We Need To Unlock Bootloader Use Any Good Tool Or Htcdev(dot)com Website For Bootloader Unlocking if You Dont know how Use Search Function You Will Find Many Post About How To Unlock Bootloader Also On Google Too.

Step - 2 CWM Flashing & Root

After Unlock Bootloader We Need To Flash Custom Recovery For M7_UL TWRP Recovery Is Best So Put Phone in Fastboot Usb Mode & Open Command Windows In Adb Folder & Put TWRP Recovery in adb Folder Too Now Use Command
fastboot flash recovery TWRP-recovery.img
After Successfully Write TWRP Now Reboot Handset In Normal Mode And Copy
Super-Su.Zip Into Handset Internal Memory & Again Go Into Recovery Mode
And Select install Option From Recovery Home Menu And Select From Internal storage And Flash.
Now Reboot Handset To Normal Mode And Go Application Menu & Open Super Su App It Will Gives You 2 Options Flash Super su Normal Mode Or Via TWRP
Select TWRP (Important Otherwise Super SU Not Install) Now Wait handset Will Reboot Into TWRP And Installing Super SU After Installation Handset Will Reboot Into Normal Mode Now Check Super SU Installed & Fully Working You Are Done Handset Now Rooted & TWRP Installed

Step - 3 Flash Custom Rom & Kernel If You Need S-Off On 4.4.2 Hboot 1.57

For Flashing Custom Rom If You Need S-Off On 4.4.2 Hboot 1.57 You Need To
Copy + Into Ur Handset Internal Memory After Copy zips Go Into TWRP Recovery & Wipe Data , Cache , Delvik Cache After Format Now Select Install Option & Select First Now Click On Add More Zip Option & Select & Flash Wait Until Flashing Done When Flashed Successfully Dont Reboot Handset Go Back Recovery Home Menu & Select Reboot Option And Select Reboot To Bootloader Option You Will See Again Handset Again On Fastboot USB Mode Now Again Open Command Window In ADB Folder & Copy boot.img Into ADB Folder. Now Use This Command
fastboot flash boot boot.img
After Successfully flashed boot.img Use Command fastboot reboot
Handset Will Reboot Into Normal Mode You Are Done Custom Rom Installed + Custom Kernel For S-Off On 1.57

Step - 4 Firewater S-Off On 4.4.2 Hboot 1.57 M7_UL

After Flash Custom Rom & Custom Kernel Now you can S-Off Ur Handset With Firewater. Go Into Setting / About device / Software information / More Baseband Information / Tape 7 To 8 Time On Build Number\Version Developer Mode Enable On Ur Handset Now Go Back To Main Setting Menu & Select Developer Mode And On USB Debugging Go Back Main Setting Menu And Select Super SU Option Now Go Into Super Su Setting & Change Super Su Permission Only Apps To Apps & ADB Now Open Command Window In ADB Folder & Copy Firewater In ADB Folder And Use Commands Like This

adb reboot <–important!!!! Means Must Use This Command First
adb wait-for-device push firewater /data/local/tmp
adb shell
chmod 755 /data/local/tmp/firewater

Answer Yes With Capital Y And Wait Till It Says Your Device Is S-OFF
Dont Touch Ur Device During This Process You Will Get Msg ur Device is Now S-Off Congratulations You Are Done With S-Off Want To See ? Go Into Bootloader You Will See S-Off There

Step - 5 Changing CID To Any Or Super CID After S-Off

After S-Off Changing CID Is Very Simple & Easy Put Handset Into Fastboot USB Mode. Open Command Windows In ADB Folder And Use 1 Simple Command For Changing CID To Any Other You Want or Super CID
For Super CID

fastboot oem writecid 11111111

Or Any Other Just Replace 11111111 To Any Like HTC__001 ETC After Successfully Change CID Use This Command

fastboot reboot-bootloader

Handset Will Reboot Into Bootloader Again & Your Handset CID Now Changed
You Are Done This Step

Step - 6 Downgrade Hboot From 1.57 To Any Older After S-Off For Downgrade OS Version

After S-Off Downgrading Hboot Is Also Very Simple & Easy If You Want To Use Any Older Version. You Need Ur Required hboot Firmware zip And ADB Package. Put Handset Into fastboot USB Mode And Copy hboot Firmware Zip Into ADB Folder Now Open Command Window In Adb Folder And Use This Command fastboot oem rebootRUU Ur Handset Will Go Into RUU Mode
Now Use Command As Ur Choice Of Hboot Version Witch You Want

fastboot flash zip
If 1.44 Then
fastboot flash zip
If 1.54 Then
fastboot flash zip
If 1.55 Then
fastboot flash zip
If 1.56 Then
fastboot flash zip

After Successfully Flashed Zip Now Type Command

fastboot reboot-bootloader

Handset Rebooted To Bootloader Again Now
Check ur Hboot Version Downgraded & You Are Done With Hboot

Now Use This Post If You Want Downgrade M7_UL Stock Roms

[COLLECTION] HTC M7 RUU, OTA, and Stock Nandroid Downloads

All These Files Are In 1 Package Download With Resumable Link In This Zip
All Things Have Witch You Need Custom Rom , Custom Kernels , Firewater , TWRP , Super-Su , hboot zips Download Click Downlad Link Below

HTC One M7 4.4.2


HTC One (M8) unlocked and Dev edition now getting Lollipop

Following the HTC One (M8) Google Play Edition, which received its tasty Lollipop treat last month, two more iterations of the company's flagship smartphone from last year are now in the process of getting the software update. These are the One (M8) Developer Edition, as well as those units that were sold unlocked, sans carrier contract.
The update will come to them over-the-air, as is customary. And as always, it may take a few days for it to make it to all devices out there, since such rollouts are usually staggered.

Nevertheless, this is good news for owners of the HTC One (M8) in these two flavors. Naturally, the carrier-customized models should follow in getting Android 5.0 Lollipop, but when that happens is probably up to each carrier from this point on. HTC has received "TA" (which stands for technical acceptance) for the update from Google, but for carrier versions those companies need to approve it too.
If you have an unlocked or Dev version One (M8), then make sure you check for updates - you might get a nice surprise. After applying the Lollipop update, you'll be running build 4.16.1540.8. The download is around 580MB in size.
Source | Via

Samsung S5 G900F Dead Boot Repair Complete files included


Odin Dowanload

Boot Loader Files
(Different firmware Bootloaders soon vil b added In My folder)


SM-G900F Boot Recovery Guide PDF

Full Folder Here


Note: If yu get error while flasing Bootloader on working mobile that
means yu re on lateset version Bootloader So Need to Create new
firmware version Bootloader. To create Bootloader from new
firmwares Follow this
Guide here

* Run Odin flasher.

* Click on PIT button and select: MSM8974PRO_boot_recovery.pit

* Click on BL button and select: BL_G900Fxxxxxxxx_...tar

* Check T Flash option at Odin flasher.

* Insert the microSD card inside a working Galaxy
S5 SM-G900F mobile phone

* Put the working Galaxy S5 SM-G900F mobile phone
into Download Mode

* Connect the GS5 mobile phone to the computer using
the USB cable.

* When Odin3 flasher detects the device, Click on Start button

* After Odin3 do his job, You will get the PIT and Bootloader
files on the microSD card

* Remove the microSD card from the working GS5 and
insert it inside the Dead Galaxy S5 mobile phone.

* Press and Hold the Volume Down key + Home key + Power key.

* If the recovery process completed successfully,
You will get the dead Galaxy S5 device into Download Mode.

* Now you have to flash your device with
full firmware package Pit, Bootloader, AP, CP, And CSC files.

How to Root Galaxy S5 SM-G900H Runs on 4.4.2 Stock Firmware


Step by Step Guide on How to Root Galaxy S5 SM-G900H Runs on 4.4.2 Stock Firmware

Download CF-Auto root for the Interntional Galaxy S5 SM-G900H:

Download CF-Auto root for SM-G900H (Exynos Octa):
Download Odin and USB driver:
Galaxy S5 USB Driver  download

Install the USB Driver

Simply run the downloaded USB driver to install. Without the USB driver your computer will not recognize your Galaxy S5.
Unzip or extract the downloaded files – compressed file can be extracted using 7zip, winzip, winrar or any unzipping program in your computer.
Galaxy S5 root CF-Auto-root G900H

Getting Started on Installing CF-Auto Root on Galaxy S5 SM-G900H

Back up all of important data files – You should make sure that you have a back up copy of all of your irreplaceable data stored from your phone. If you hadn’t make any back-ups then its now the best time to do it.
Recharge your Galaxy S5 SM-G900H– Also recharge your phone right now if the battery power is getting too low, a power failure while installing the firmware to your phone may caused undesired outcomes.
Prepare a Windows base OS computer or laptop – Odin flasher tool will not run on MAC and other OS.
Use the supplied USB data cable of your Galaxy S5 G900H – A bad USB cable will be causing flashing errors.
Enable USB debugging mode – if you are having issues connecting your device to the computer try to enable the this option. In your Samsung Galaxy S5, go to Settings>> About device>> then look for the firmware build number and then tap that build number for around 7-times until a message pop-ups that says something “congratulations you are now a developer”.
Remove the external micro SD card – if you have one, to avoid any failures and error during the flashing process.
TURN OFF the Reactivation Lock – This is only needed if you already turned-it-ON, from which you cannot modify the system when it’s turned-ON. Just tap on Settings>>Security>>Reactivation Lock and then uncheck the Turn Reactivation lock on.
Confirm that you have the Galaxy S5 SM-G900H (Exynos Octa) – This may sound awful but risk from messing-up the phone also starts here. To do this just head-over to your phoneSettings>>About Device>>Then look for the Model number.  It should be SM-N900H indicated from there and not the other Galaxy S5 variants or else this will not work and it may ended-up into boot loops.

Run and Configure Odin

Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ and the ‘AUTO-REBOOT , just leave alone the ‘F.RESET TIME’ check-box remained checked.

Reboot your Galaxy S5 SM-G900H into Download Mode

To reboot the Galaxy S5 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.
samsung galaxy s5 download mode
You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!”

Connect your Galaxy S5 SM-G900H  on your computer or Laptop

Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. USB port numbers in Odin download mode starts from zero to  seven. If you do not see a COM port number then there’s something missing or went wrong. You may read again from the top of this post.
Simply click on the AP button, then browse to the folder where you put the “CCF-Auto-Root-k3g-k3gxx-smg900h.tar.md5″ that you have previously downloaded and then select and load it. Odin should look like this picture mode again.
Root Galaxy S5 SM-G900H Odin CF-Auto-root
Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the CF-Auto Root on your Galaxy S5 SM-G900H.
Do not ever interrupt your computer and your Galaxy S5 while the flashing already started, such as disconnecting the USB data cable or turning off the device. Just wait until it completely finishes, it may takes around a minute to flash the CF-Auto root.
You may then check if you successfully rooted your Galaxy S5 SM-G900H running on 4.4.2 Android 4.4.2 KitKat firmware, just simply look for the ‘SuperSU’ on the apps menu.

Update the SuperSU Apps from Google Play Store

If you will see a message that says something like this “SuperSU has Stopped” all you need is update the SuperSU app at playstore. This is basically normal since the 4.4.2 KitKat update includes KNOX apps that may interfere the root access. You may need to uninstall the SuperSU then re-install or update to latest SuperSU apps at Google Playstore.

Download Latest Version IOS iPhone 5S GSM And GSM + CDMA

Download Latest Version IOS iPhone 5S GSM And GSM + CDMA
Download :
8.1.2 (5s GSM): iPhone6,1_8.1.2_12B440_Restore.ipsw
8.1.2 (5s GSM+CDMA): iPhone6,2_8.1.2_12B440_Restore.ipsw

How to install Android 5.0 N9005XXUGBNL8 Lollipop official firmware leaked for Galaxy Note 3 LTE

Samsung has rolled out the Android 5.0 update starting with the new Galaxy S series flagship smartphone. Now it looks like the next device to get the Android dessert treatment is the third gen Galaxy Note, suggests a leak.
An Android Lollipop build for the LTE variant of Galaxy Note 3 (SM-N9005) has been leaked. The build version of the leak is N9005XXUGBNL8, which weighs in at 1.10GB.
Along with the Android 5.0 software version, the leak brings a redesigned TouchWiz UI. Besides, the Android 5.0 uses a new compiler, ART, which makes the device incompatible with Xposed Framework, reports XDA.
Recognised XDA developer, mithun46 has shared this stock firmware leak. The developer, however, confirms that since this is an official leak, it will not trip the Knox security counter.
The developer also recommends that the PIT file be kept as a backup, in case something goes wrong. To do so, open a command prompt and execute the following commands:
  • adb shell su -c "dd if=/dev/block/mmcblk0 of=/sdcard/My-N9005.pit bs=1 skip=17408 count=4244"
  • adb pull /sdcard/My-N9005.pit
This will create a backup of your PIT file.
Installing this will erase the factory reset of Note 3, therefore create a back up of all important data of the device.
  • Ensure that you have installed proper USB Drivers for your Galaxy Note 3.
  • Enable USB Debugging Mode on phone to connect it with the computer and use Android SDK with it. [Navigate to Settings>> Developer Options>> check the USB Debugging option.]
  • As the tutorial is likely to wipe out all data of the phone, create a backup using any custom recovery.
  • Your Note 3 should have above 80% battery charge.
  • You should have an unlocked Galaxy Note 3 SM-N9005 unit.
  • The phone will lose custom ROM with the installation of leaked official firmware. Also, the custom recovery will be replaced by the stock version.
  • The device will no longer belong to a rooted version with the installation of official firmware.
  • N9005XXUGBNL8 Android 5.0 leak firmware works only with LTE version of Galaxy Note 3 SM-N9005. As flashing this on any other variant might brick the device, verify the model number of Galaxy S5 by navigating to Settings>> About phone>> Model number.
  • Note that this is a leaked firmware, not officially released by Samsung.
  • IBTimes UK will not be held liable for any damage to the device.
Download files
Odin v3.09
How to install N9005XXUGBNL8 Android 5.0 Lollipop leak official firmware on Galaxy Note 3 LTE SM-N9005
Step-1: Extract the downloaded firmware zip using any extracting tool to get a .tar.md5 file with few other files, which are optional
Step-2: Extract the Odin zip to get Odin3 v.3.09.exe with few other files
Step-3: Switch off the Galaxy Note 3
Step-4: Place the phone into Download Mode by pressing and holding Home, Power and Volume Down button together
Note: Ensure that you have installed USB Drivers installed on the computer.
Step-5: Run Odin as Administrator on the computer. To do so, right click on the application and select Odin as Administrator from the drop down menu
Step-6: Connect the Galaxy Note 3 to computer using USB cable while it is in Download mode. Wait for some time until Odin detects the device. When the phone is connected successfully, the ID: COM box in Odin will turn light blue with COM port number. This step might take some time
Step-7: In Odin, click AP button and select the firmware file with .tar.md5 extension
Step-8: For 32GB Note 3, click Auto Reboot, Re-Partition and F.Reset Time checkboxes in Odin
For 16GB Note 3 models, ensure that only Auto-Reboot and F.Reset Time options are checked. Do not click the Re-partition option
Step-9: Verify everything and click the Start button in Odin. The installation process should begin now and take a few minutes to complete
Step-10: When the installation process is completed, the phone will restart automatically. Keep in mind that the first boot will take a little longer than usual, about 10 minutes. Do not press any button on the device during the process. After some time you should get the Android 5.0 screen
Navigate to Settings>> About phone to verify the new Android software version of your Note 3.
[Source: XDA]

Backup And Restore Imei Without Root Samsung Galaxy S3 ( How To )


1) Download NV reader/writer
HERE and install THESE drivers.

2) Dial *#7284# and select "Qualcomm USB Settings" then check "RMNET + DM + MODEM".

*If you are running a aosp rom (cm9,cm10,aokp etc) you can use the diag method described

3) Save item 00550 with NV reader/writer. You can write the backup directly back to the phone. This backs up your IMEI only.

*If you want a
FULL NV backup read the phone with the default values [Range (Dec): 00000-65535].

4) Dial *#7284# and select "Qualcomm USB Settings" then check "MTP + ADB".

Demonstration video


1) make a backup of item 00550 like described above and open with your favorite text editor.

2) Separate your IMEI (find it behind the battery) into blocks of two but with the first digit alone, like this-


3 53 02 20 50 23 42 85

3) Now add an "A" after the first digit then reverse the two numbers in all the other blocks, then add a 08 to the beginning. Like this-

3 53 02 20 50 23 42 85

08 3A 35 20 02 05 32 24 58

4) Now replace the first nine values in the NV block with your converted IMEI and save the text document.

5) Write the NV back to the phone and then reboot.




How To Root Samsung Galaxy V SM-G313HZ

1.Download VRoot or or any other Windows PC rooting software to root Samsung Galaxy V.
2. Run Odin. Load G313HZDDU0ANH2_ROOT.tar by pressing AP button.
3. Turn off phone and enter Samsung download mode by pressing Power + Volume Down + Home buttons then press Volume Up to continue.
4. Connect your phone to PC using a compatible data cable. Make sure Odin has detected your phone before continuing next step. If not, try to re-run Odin.
5.  Click start button, your phone will now reboot and close Odin after device turns on.
6. Run Vroot.
7. Connect your phone to PC via usb data cable if you haven’t done so. Wait till Vroot detects your phone.
8. Click Root button to start rooting your phone. This will take several minutes & your phone will reboot several times so do not unplug your phone till Vroot has finished rooting your phone.
9. Unplug your phone from the PC and enjoy your rooted Samsung Galaxy V!

DBb tools v:10 by darmiles

2013-06-03 - blackberry tools by:darmiles Many More Added
What's New
- Added Support

2 Dual WIPE my device only
3 NUKE my device only
4 Load OS SFI only (This loads OS not COD files)
5 Load NAL only (No application linked)
6 Load Full OS only
7 This will WIPE, NUKE, NAL and Load SFI AND full OS in 1 click


Darmiles Blackberry1.exe


*Added new MEPS
*Minor bugs Fix


READ PassCode on iPhone 4 iOS 7.1.2

READ PassCode on iPhone 4 iOS 7.1.2

Its tested on iPhone 4 with 7.0.0 - 7.0.4 - 7.1.1 - 7.1.2 iOS versions.

ONLY iPhone 4 (IPHONE3,1) revision is supported !!! mabe later will support 4,2.

Download this file and extract it to c:/A folder. Use winrar to extract. WinRAR archiver
Download iphone firmware to the same folder.

1. Lets Go in to DFU mode.
How To Put Your iPhone Into DFU Mode

4. Launch "Gecko_iPhone_Toolkit.exe , Chose iPhone 4 (GSM) and press BOOT, than OK, than choose firmware we just downloaded (strictly it should be in the same directory as every other file)


5. Leave gecko running. Launch RUN.bat and wait until redsn0w finish its job. It will tell you that it is DONE !
Nowstart looking at your iphone screen.

6. Once iPhone screen starts to show a BIG white OK, Quit Redsnow, and go back to GECKO.
Press LAUNCH button and wait.
It should take 1 to 40 min untill software Bruteforces your PassCode.

iGnore if Gecko tool is frozes for a momment, just leave everything and depending on what PassCode it is, it will take some time.
For example 0011 code takes about 5 to 10 seconds to break, 5555 PassCode needs about 30 minutes, so 9999 can take more than one hour i think.

Whenyour PassCode is Found, it will prompt some text with your PassCode in Gecko tool as usually, just be patient.

If your iPhone Is Disabled,

jsut ssh to your iphone via

it only works with older yava version 6,5 i think.. so you need to delete your java 7,x and install older one,, you can find it i think.

once you done, you can turn on WinsCP Download WinSCP and login in to iphone.

just enter localhost as host,, port number will be 2022
username will be root
password alpine

than press black square (terminal simbol) and write and press enter, wait a few moments and close this little window,.

Go to File location:

mnt1/System/Library/Preferences/ just edit this file with plist editor Download plist Editor

just change plist file entry about 'Failed Attempts' from what you have (it will be about 8 or 10 if its Disabled...) so just change it to something bellow 5, make it 1 or even zero. and save. than restart iphone, you will be at recovery mode, kick out from recovery mode with tinyumbrella and you will boot normally.

Download Latest iPad Firmware Files

Below you can find the direct links to the iPad Firmware Files for every released firmware version.

Please note that if you use Safari you must disable the auto unzip feature. It may be easier to just use Firefox!

Download Latest versions :
7.1.2 (iPad 2 Wi-Fi): iPad2,1_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad 2 GSM): iPad2,2_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad 2 CDMA): iPad2,3_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad 2 New): iPad2,4_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad Mini Wi-Fi): iPad2,5_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad Mini GSM): iPad2,6_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad Mini CDMA): iPad2,7_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad 3 Wi-Fi): iPad3,1_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad 3 CDMA): iPad3,2_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad 3 GSM): iPad3,3_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad 4 Wi-Fi): iPad3,4_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad 4 GSM): iPad3,5_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad 4 GSM+CDMA): iPad3,6_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad Air Wi-Fi): iPad4,1_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad Air Cellular): iPad4,2_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad Air China): iPad4,3_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad Mini 2 Wi-Fi): iPad4,4_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad Mini 2 Cellular): iPad4,5_7.1.2_11D257_Restore.ipsw
7.1.2 (iPad Mini 2 China): iPad4,6_7.1.2_11D257_Restore.ipsw

Download Latest iPhone Firmware Files

Below you can find the direct links to the iPhone Firmware Files for every released firmware version. Please note that if you use Safari you must disable the auto unzip feature. It may be easier to just use Firefox!

Download Latest Firmware :
7.1.2 (4 GSM): iPhone3,1_7.1.2_11D257_Restore.ipsw
7.1.2 (4 8GB): iPhone3,2_7.1.2_11D257_Restore.ipsw
7.1.2 (4 CDMA): iPhone3,3_7.1.2_11D257_Restore.ipsw
7.1.2 (4S): iPhone4,1_7.1.2_11D257_Restore.ipsw
7.1.2 (5 GSM): iPhone5,1_7.1.2_11D257_Restore.ipsw
7.1.2 (5 GSM+CDMA): iPhone5,2_7.1.2_11D257_Restore.ipsw
7.1.2 (5c GSM): iPhone5,3_7.1.2_11D257_Restore.ipsw
7.1.2 (5c GSM+CDMA): iPhone5,4_7.1.2_11D257_Restore.ipsw
7.1.2 (5s GSM): iPhone6,1_7.1.2_11D257_Restore.ipsw
7.1.2 (5s GSM+CDMA): iPhone6,2_7.1.2_11D257_Restore.ipsw

Download Firmware iPhone

Download Firmware iPhone
Below you can find the direct links to the iPhone Firmware Files for every released firmware version. Please note that if you use Safari you must disable the auto unzip feature. It may be easier to just use Firefox!

Download Here
7.1.1 (4 GSM): iPhone3,1_7.1.1_11D201_Restore.ipsw
7.1.1 (4 8GB): iPhone3,2_7.1.1_11D201_Restore.ipsw
7.1.1 (4 CDMA): iPhone3,3_7.1.1_11D201_Restore.ipsw
7.1.1 (4S): iPhone4,1_7.1.1_11D201_Restore.ipsw
7.1.1 (5 GSM): iPhone5,1_7.1.1_11D201_Restore.ipsw
7.1.1 (5 GSM+CDMA): iPhone5,2_7.1.1_11D201_Restore.ipsw
7.1.1 (5c GSM): iPhone5,3_7.1.1_11D201_Restore.ipsw
7.1.1 (5c GSM+CDMA): iPhone5,4_7.1.1_11D201_Restore.ipsw
7.1.1 (5s GSM): iPhone6,1_7.1.1_11D201_Restore.ipsw
7.1.1 (5s GSM+CDMA): iPhone6,2_7.1.1_11D201_Restore.ipsw