Cyclone DEMOLITION! XGold1 Unlock/RPL, XGold2 Flash/RPL, W7 64bit, New log2cod, more.

Installer v1.11 is Ready.

What's new ?
=====================
Installer v1.11
07.03.2011
=====================

• New BB5 FBUS/USB Loaders v10.48.1 introduced
• DCT4/BB5 Product/Variant caching added. Saves lot of time when selecting correct Datapackage. This is done automaticcly. During Deletion or Installing some of DP, cache is rebuilt automatically on user demand.
• XGold2 USB Flashing Introduced (C1-01,C1-02,C2-00,...)
• Added XGold2 RPL Backup (including CCC,HWC,NPC,Simlock) FIRST in the world. The backup is created automatically during flash.
• Added XGold2 RPL Write (CCC,HWC,NPC and Simlock) seems FIRST in the world. In order to write RPL file, you need flash your phone and add RPL file as secondary flashing Image (Add XGold2 RPL button).
• XGold2 RPL Contains FULL phone security, possible to Full restore after Flash Chip change
• Added XGold1 Unlocking by Reading LOG2COD Log file
• Added XGold1 Low-Level PM Dumping (both Secured and Nonsecured areas), seems 1st in world
• Added XGold1 Low-Level RPL Backup, seems 1st in world
• XGold1 Backed-up RPL file might be used to completly Re-Initialize phone security, i.e. after flash-chip change (RPL Contains IMEI and Simlock Block), seems 1st in world...
• Both XGold1 Low Level dumps support dead phones (phone might be dead, Cyclone will binary dump PM from flash chip directly)
• Added XGold1 Low-Level Deleted PM Keys dumping (extra option-don't write back readen PM file with deleted keys, they are ASCII marked as deleted ones). Support deleted messages, contacts, ..., seems 1st in world
• Added XGold1 FBUS/Keyboard SL Bad Entries Counter reset, seems 1st in world
• Reading XGOLD1 LOG2COD is fully standalone, seems 1st in world
• XGold1 Unlock/RPL supported mobiles: 1616, 1280, 1208, 1209, 1800, C1-00, and others...
• Added "Mapped At" FlashChip information during XGold Flashing, when possible
• Added "Sector Size" FlashChip information during XGold Flashing, when possible
• No reboot flashing for XGold added
• APE block flashing fixed for various RAPIDO mobiles
• Fixed Old Protocol (Dead) USB Flashing (RAPIDO phones: N86,etc)
• Fixed Blackberry Module upon reading MEP via USB it was placing it on wrong window
• Assigned COD files are now verified before sending to server, the auxiliary verification also takes place at Server Side
• Fixed OpenDialog filter when adding DCT4/BB5 flash file
• log2cod: v1.1 Released
• log2cod: GPU Selftests added (some GPU find bad code, or didn't find anything at all)
• log2cod: Added Ivan Golubev EULA
• log2cod: Added Queue managment
• log2cod: Code Verification added after successfull calculation
• log2cod: Console is cleared after some salts processed in order to avoid overflow
• log2cod: PeekNamedPipe() problem fixed
• log2cod: Added queue processing in loop mode (you can add new jobs during calculation)
• The transaction bar have been a bit resized
• Cyclone Box HW Rev B11x, C11x added
• Models.ini updated
• Box USB Drivers updated to v1.0.0.6 they are digitally signed now, no more problems on Win7 / Win Vista x64
• COM Emulation Service Driver updated to v1.0.0.1 it is digitally signed now, no more problems on Win7 / Win Vista x64
• Main Software is now Digitally Signed (Authenthicode)
• log2cod is now Digitally Signed (Auhtenthicode)
• Cyclone Calculator is now Digitally Signed (Authenthicode)
• Installer is now Digitally Signed (Auhtnethicode)
• New phones added to Virgin SX4 Database
• New phones added to Security Database (Virgin RPL)
• Box Firmware v1.53 Released
• Some minor and major changes and bugfixes
• Versions snap
• Installer v1.11
• Main x86 Application v1.0.0.11003
• x86 Memory Manager v4.76.0.179
• Native USB Drivers v1.0.0.6
• USB-COM Stack Drivers v1.0.0.1
• Onboard Secure Bootloader v2.13
• Onboard Main Nokia Application v1.53
• Onboard COM Emulation Code v1.00
• Onboard Security Card Revision v1.10
• Nokia Connectivity Cable Drivers 7.1.34.0
• BB5 USB/FPIF Single Line/FPIF DualLine v20110301
• DCT4 FPIF Single Line/USB v20100410
• DCT4 Unlock Patches DEPRECATED
• Communication Stack SSLv3-keys-06092008
• Skin Stack v7.21
• Box Firmware v1.53 is needed.

Download Links
http://www.karwos.hk/CycloneBoxInstaller.exe
http://www.siroya.org/downloads/CycloneBoxInstaller.exe
http://www.cyclonebox.com/downloads/...xInstaller.exe

ps1. yes, germany support server HDD is physsicly crashed.. it will be back in few days.. hope with noncorrupted content.
ps2. be prepared for more standalone&HOT things these days
ps3. new drivers included in this package are ONLY compatible with this new version. Don't try using them on older builds and vice versa !


IMPORTANT: You must update your box drivers to work with the new software version. To do this, after you installed the last exe, go in hardware manager and update your drivers looking for them in the folder c:\Program files\Cyclone box\Drivers. Once done, please, update your box firmware using the new software version. Failing doing this step will mean getting this error

Code:

Box Maintenance procedure started at 16:24:27
Box Open Error -> Security problem #5
Box Maintenance Error -> No connection was established, or box is not in needed mode

Also notice that when you update the Box Firmware can get this "error"

Code:

Updating Security Area...
Security Area Updated, Took: 0.109s
Updating Main Firmware...
Main Firmware Updated, Took: 15.859s
Updating COM Emulator Firmware...
COM Emulator Firmware Updated, Took: 1.297s
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Firmware: Cyclone Nokia Application v01.53, (Mar  7 2011 00:52:52, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 wk9
Boot Agent: Cyclone Secure BootAgent Server v3.01 (C) KarwosSoft 2010 wk41
Cyclone Server Send Command Error -> Code: 500, Not allowed to Upgrade Bootloader

Failed to Upgrade Bootloader -> Server Transaction Failed
Secure Bootloader Update Skipped, Not allowed or not needed
Disconnected from Cyclone Server
Box Maintenance finished successfully

Ignore it , this "error" means that your Box bootloader is already up-to-date, and doesn't needs to be upgraded.


Best Regards,
Cyclone Team

Share :

Facebook Google+ Twitter